If you have tried to install Slackware on this netbook…
…you know that default installer doesn’t see the hard disk, because the kernel needs support for Intel US15W chipset :/.
But there’s a workaround for us, we need to insert in the kernel the module that allows chipset work properly.
You have to download the pata_sch.ko module from here, or take it from an installed slackware, or download kernel-modules-184.108.40.206-i486-2.txz package and extract the module.
This is what i’ve done: i’ve put the module in one usb key, i’ve created a bootable usb key with default usbboot.img image and i’ve booted with the hugesmp.s kernel.
Now it’s time for the little trick, mount the key with the module (or you can setup the nic card and download it straight from the web), copy the module and insert it in the kernel:
mount /dev/sdb1 /mnt
cp /mnt/pata_sch.ko .
Now you can see the disk, enjoy your Slackware on Aspire One a751 :)
Slackware doesn’t see the hard drive during installation because there isn’t pata_sch module. This happen again when you try to boot your new installation.
So, after installation, when you press the EXIT button, do not reboot but chroot inside your installed Slackware, with chroot /mnt
Then create a custom mkinitrd with the pata_sch module built-in, with
mkinitrd -c -k 220.127.116.11-smp -m ext3:pata_sch -f ext3 -r /dev/sdax
Assuming you’re using ext3 and sdax is the / partition, the module should be present in the installation if you’ve installed kernel-modules-smp-18.104.22.168_smp.
I’ve installed Slackware in an encrypted LVM volume, following the README_CRYPT.TXT guide, except for the mkinitrd command, i’ve used:
mkinitrd -l it -c -k 22.214.171.124-smp -m ext3:pata_sch -f ext3 -r /dev/cryptvg/root -C /dev/sdxx -L
And i’ve used GRUB instead of LILO, because i’ve installed the bootloader in the /boot partition instead MBR, where there is Truecrypt bootloader for Windows encrypted partition.
If someone have other tips about Slackware on this netbook, feel free to write a comment, thanks.